Call UsCall Us :
ESD Meter

ESD Meter

Product Details:


Product Description

Our firm is globally recognized as a trusted manufacturer, supplier and exporter of ESD Meter. These meters are designed with qualitative components incorporating sophisticated technology to ensure their durability. Owing to their high operational accuracy, portability, compact design, least power consumption and clear display of readings, offered meters are highly acclaimed by our clients. In different industries, offered ESD Meter is used for measuring the resistance between any two points and surface resistivity in compliance with EOS/ESD association standard S-4.1.


Measurement Range <10^3 to >10^12 Ohms (or) Ohms/sq
Measurement Accuracy Half decade
Resolution One decade
Test Voltage 100V.
Indication Different Color LED’s
Test actuation Press To Read Switch
Power supply 9 Volt Battery
Low battery threshold Test Voltage across probes 80V (+/-1V).
Low Battery Indication Flashes by Red 10^13 LED
Dimensions 135 x 70 x 30mm
Weight 200 Gms
Calibration Recommended every 12 months
Warranty 12 Months
Accessories Surface to Ground cord & Carry Case.
Optional Testing & Measuring Probes

The Surface Resistivity Meter measures both surface resistance and resistance to ground. This is meant for use in evaluating a wide variety of ESD protective materials including tablemats, floor mats, and hard ESD-laminates. It measures and displays Surface Resistivity as well as surface to ground and point-to-point resistances. These measurements can be done in the range of <10E3 to >10E12 ohms by using two 2.5-kilo (5lb) heavy electrodes or through internal probes. To check whether surface Resistivity is in accordance with EOS/ESD Association standards S-4.1.

Measurement Range
Digital Display Range
< 1X10E3 to >1X10E12 ohms & ohms/sq
LED Decades Display Range < 10E3 to > 10E12 ohms & ohms/sq
Digital Measurement accuracy 0.1 decade
LED Measurement accuracy 0.5 decade
Digital Display Alpha Numeric LCD.
LED Display indication By Different Color LED’s
Open Circuit Voltage 100V +/- 5%
Battery status indicator By Dual Color LED.
Test actuation Press To Read
Power supply 10.8V Rech-Battery
Dimensions in mm 210 x 110 x 40mm
Weight 500 gms
Calibration calibration recommended once In 12 months.
Warranty 12 months.
Optional Testing & measuring probes
Esd Audit kit
External cable, 12V Charger & Carry Case.

The model SRM-04 Digital Surface Resistivity Meter is a portable, versatile, instrument design to accurately measure the resistance between two points, surface to ground and surface resistivity accordance with EOS/ESD association standard S-4.1 in addition, the meter measures & displays ambient temperature & relative humidity.

The model SRM-04 Digital Surface Resistivity Meter (includes Testing & Measuring Probes) is designed to make measurements of Work surface, floors, foot wears, garments, workstations & operator chairs etc..

  • Alpha numeric display Row 1: Ambient temperature and relative humidity are displayed during the meter ON condition.
  • Alpha numeric display Row 2: Provides easy to read measurements directly from the meter include exponents. No interpretations or calculations are required. 
  • Power ON Button: Activates electrical power to the meter.
  • Power OFF Button: Battery Status Button: To know the battery power in percentage.
  • Surface Resistivity: Parallel stainless steel electrodes provide for measurement of surface resistivity or when quick testing without the use of Testing & Measuring Probes is desired.
Measurement Range <1x10E3 to >1x10E12 ohms & ohms/sq
Measurement accuracy 0.1 decade
Probe Voltage 100V +/- 5%
Temperature accuracy +/-5°C
Relative humidity Range from 5% to 95%; +/-10% Typ.
Test actuation Press To Read
Power 9.6V Rech-Battery.
Electrification period 10 Seconds
To Rech-Battery 12V Charger (Accessories)
Battery Status Displayed In LCD.
External Electrodes Two 5 Pound electrodes with Conductive pads
Dimensions in mm 205 x 110 x 40mm
Weight 500 gms
Calibration Recommended once In 12 months.
Warranty 12 months.
Optional Testing & measuring probes, ESD Audit kit
Accessories External cable & 12V Charger.

Two cylindrical (2.27Kg) 5 Pound metal electrodes shall have a diameter of 63.5mm (2.5 Inches) each having contacts of electrically conductive materials with a shore-A (IRHD) durometer hardness of 70 (ASTM method D2240-1986). The resistance between the electrodes shall be less than 1-Kilo ohms when measured at 10Volts or less on metallic surface. These electrodes confirm to ANSI/EOS/ESD-S4.1-1990 Standards.
Enter Buying Requirement Details
Email Id
Mobile number